The difference between NdFeB and SmCo magnets
Jun 07, 2023
The difference between NdFeB and SmCo magnets
Many people are confused when choosing magnetic materials, such as NdFeB and SmCo magnets, which one has better magnetic performance, which one is more suitable for temperature-resistant environment, cost-effective and so on. Today, let me introduce to you the difference between the two.

Neodymium iron boron, remanence is higher than samarium cobalt, can reach about 55 at present, samarium cobalt can only reach 32. Remanence can be simply understood as the suction force as the saying goes, NdFeB is much larger, but the coercive force of NdFeB is lower than SmCo. Coercivity is the ability to resist demagnetization.
The high temperature resistance of NdFeB is not very good, and the current maximum is 200 degrees. Samarium cobalt, with a magnetic energy product of 30, can withstand 300 degrees, and some special products can reach 450 degrees after reducing the remanence. This means that there is a relationship between remanence and coercive force (attractive force and anti-demagnetization ability). If you want this, you may have to sacrifice that.
NdFeB has poor corrosion resistance and weather resistance. Therefore, in general, electroplating and other protection are required, and even packaging and anticorrosion. Common galvanized, nickel-plated, epoxy and so on. Even so, not as good as samarium cobalt.

Both NdFeB, SmCo are brittle and hard materials, so they cannot be processed by ordinary cutting, and the general processing method is wire cutting.






