How to avoid damage to permanent magnet motor magnets
Apr 17, 2023
How to avoid damage to permanent magnet motor magnets?
The method for assembling the magnetic steel of a high-speed permanent magnet synchronous motor comprises the following steps: fixing the magnetic steel to the yoke of the rotor shaft by hooping the magnetic steel on the yoke, the magnetic steel is axially arranged on the yoke circle by circle, and each A plurality of wedges are evenly arranged in the magnetic steel of the ring to position the magnetic steel; the latitude-free tape is heated and baked to make it solidify, and the baking temperature does not exceed 150°C; the pressure plates are respectively installed on the outer sides of the magnetic steel of the first ring and the last ring. In this invention, the magnetic steel hoop is set on the yoke through the latitude-free tape, and the connection between it and the magnetic steel is strengthened by baking and curing the latitude-free tape, so that the magnetic steel will not loosen or even fall off due to the interaction of magnetic force The problem of avoiding the situation that affects the performance of the motor and damages the motor.
Aiming at the torque fluctuation of permanent magnet synchronous motor with fractional slots, a design method of segmental tilt angle of magnet steel is proposed. First, the number of slots per pole and each phase is calculated from the number of slots and pole pairs of the motor, and the number of cogging torques of the motor is calculated according to the traditional method. Torque fluctuation cycle angle, and then determine the oblique angle of each segment according to the number of magnetic steel segments. It can effectively weaken the torque fluctuation of the permanent magnet synchronous motor, and the formula calculation is simple. This method only needs to determine the segmental tilt angle according to the number of slots and pole pairs of the motor.






