The Influence Of The Performance Of The Magnetic Tile Of The Motor On The Working Efficiency Of The Motor
Apr 04, 2023
The influence of the performance of the magnetic tile of the motor on the working efficiency of the motor
Automobile motor magnetic tile: Send two-phase alternating current into two or four sets of motor coil windings respectively, and a rotating magnetic field is formed in the motor. The rotating magnetic field generates an induced current in the motor rotor, and the magnetic field generated by the induced current is in the opposite direction to the rotating magnetic field being pushed and pulled by the rotating magnetic field into a rotating state.
The influence of the magnetic tile of the automobile motor on the motor:
1. The bigger the magnetic energy, the better, which will greatly improve the working efficiency of the motor;
2. The better the squareness of the demagnetization curve, the smaller the dynamic loss of the motor;
3. The higher the resistivity of permanent ferrite, the smaller the eddy current loss;
4. The temperature coefficient of permanent ferrite is small, so it has good temperature stability at high temperature.
The influence of the performance of the magnetic tile on the motor:
(1) High residual magnetic induction intensity Br. Because under the same magnetic pole surface area and air gap, high Br can produce large output torque and high power. The motor will have higher efficiency.
(2) High Hcb. Because of the high Hcb, it is possible to ensure the electromotive force required by the motor output, make the motor operating point close to the maximum magnetic energy product, and make full use of the ability of the magnet.
(3) High Hcj. High Hcj can ensure that the motor has strong anti-overload demagnetization, anti-aging, and anti-low temperature capabilities.
(4) High (BH)max. The higher the (BH)max, the better the actual operation coefficient of the permanent magnet ferrite in the motor.
(5) The larger the magnetic energy Φ, the better, which will greatly improve the working efficiency of the motor.
(6) The better the squareness of the demagnetization curve, the smaller the dynamic loss of the motor.
(7) The higher the resistivity of permanent ferrite, the smaller the eddy current loss.
(8) The temperature coefficient of permanent ferrite is small, and it has good temperature stability at high temperature
(9) The starting current is small, the time constant is small, and the impact on the power supply is small.






