Magnetic Knife Strips For Kitchen
Magnetic Knife Strips For Kitchen
video
Magnetic Knife Strips For Kitchen
Magnetic Knife Strips For Kitchen suppliers
Magnetic Knife Strips For Kitchen factory
Magnetic Knife Strips For Kitchen best
Magnetic Knife Strips For Kitchen high quality
1/2
<< /span>
>

Magnetic Knife Strips For Kitchen

How It Works A neodymium magnetic knife strip is a length of solid wood or aluminium with sintered Neodymium (NdFeB) bar magnets buried behind the facing, and a knife laid against it stays. Mostly. The blade meets the field, the field holds the steel, and the counter under it clears. That...

How It Works

 

A neodymium magnetic knife strip is a length of solid wood or aluminium with sintered Neodymium (NdFeB) bar magnets buried behind the facing, and a knife laid against it stays. Mostly. The blade meets the field, the field holds the steel, and the counter under it clears. That exchange is the whole product.

magnetic knife strips for kitchen
Neodymium Magnetic Knife Strips
Neodymium Magnetic Knife Strips-6

 

Sizing and Capacity

 

Strips are quoted by length. The table below lists the four we cut, the magnet core behind each facing, and how many knives that core carries before the strip starts to slide. A 40 cm strip takes a family block, a cleaver and a pair of shears with room left for a bread knife. Longer strips are for walls with more knives, not for stronger ones. That last point is a mistake buyers make every week.

knife strip sizes table

Where They Belong

A kitchen without drawers is where these earn their keep. The strip goes on the wall above the board and the counter under it stays clear for the next cut. Home cooks buy them for the reach. Food trucks buy them because a drawer full of knives walking itself apart on a road is a hazard nobody insures twice. Butchers' counters and cooking classrooms use them because a knife on a strip drains and dries, and a knife in a drawer does neither.

 

Construction and Care

 

The strip starts as bar stock, cut to length and drilled from the back. The pockets take the N42 NdFeB magnets, the facing goes over them, and the adhesive that locks each magnet down is the part that fails first if the strip ever meets a dishwasher. Wipe it, do not soak it. The facing is sanded and oiled, so a wet blade left resting too long will mark it; a dry blade leaves nothing.

Custom Orders

If your wall needs a neodymium magnetic knife strip rather than a block on the counter, send the length, the finish and the number of knives, and we will confirm the core and the fixing before quoting. Odd lengths are cut to size on the same line.

knife strip in use

 

FAQ

Q: Will a magnetic knife strip damage or dull knife blades?

A: No, the magnetic field itself does not dull knife blades. However, dragging the cutting edge across the strip can cause scratches or edge damage. Place the flat side of the blade against the strip first, then gently rotate it into position. Lift the blade away rather than sliding it off.

Q: Can a magnetic knife strip hold heavy cleavers and large kitchen knives?

A: Yes, provided the magnetic holding force is sufficient for the knife's weight and blade contact area. Heavy cleavers may require stronger magnets or a wider contact surface. The strip's length alone does not determine how much weight it can safely support.

Q: Is it safe to mount a magnetic knife strip on a tiled kitchen wall?

A: Yes, magnetic knife strips can be mounted on tiled walls using suitable fixings. Drilling into tile requires the correct drill bit and care to avoid cracking. For heavier knives, mechanical fasteners anchored into a suitable wall substrate are generally more reliable than adhesive-only mounting.

 

Hot Tags: magnetic knife strips for kitchen, China magnetic knife strips for kitchen manufacturers, suppliers, factory, block shape neodymium magnet, high performance parylene coated magnet, high precision neodymium ring magnet, Parylene Coated Magnet, small size neodymium cylinder magnet, Teflon Coated Magnet

Send Inquiry

(0/10)

clearall