Application and advantages of magnetic steel in automobile generator

Application and advantages of magnetic steel in automobile generator

The magnetic steel block structure of the automobile generator, the magnetic steel block is groove-shaped, and one end is provided with a buckle. The magnetic steel block is installed on the outer end surface of the magnetic steel. The claw poles are divided into upper claw poles and lower claw poles. The baffle and the magnetic steel are installed between the two claws of the upper claw pole and the lower claw pole of the claw pole, and are connected and fixed in the positioning groove provided on the claw side of the claw pole by buckling.

The advantage of the structure of the magnetic steel block of the automobile generator is that when the magnetic steel and the magnetic steel block are assembled, they are inserted and installed in the positioning groove as a whole. During the installation process, the buckle will not affect the installation of the magnetic steel due to its own overhanging structure. , and can accurately position the magnetic steel; the magnetic steel is installed firmly and will not fall off, so that the service life of the generator is long and the power generation efficiency is high.

Common performance references for NdFeB tile-shaped magnets in the field of automotive motors:

New energy vehicle motor: 38SH, 35UH, 38UH, 35EH, 38EH, 40EH,

Power steering motor (EPS): 45H, 48H, 38SH, 40SH, 42SH, 48SH, 35UH

Oil pump motor: 33UH, 35UH

Active Suspension System Motor: 42SH

Starter motor: 38UH

Sunroof Motor: 35M, 38H