Magnetic Door Catcher

Magnetic Door Catcher

A traditional and reliable method of holding closed doors in their normal position is the Magnetic Door Catcher. When a lightweight door needs to stay closed, but a mechanical catcher is not necessary, a magnetic door catcher is a good fit. Typically, a magnetic catch body plus a ferrous striker plate make up a magnetic door catcher. The striker plate should be mounted on the door side, and the magnetic catch body should be mounted on the front of the top or bottom cabinet plates.

Since the majority of Magnetic Door Catchers use ferrite magnets, which have zero corrosion-prone components, they can endure for a very long period even in the most extreme environments. Magnetic Door Catcher has a sophisticated construction in addition to a respectable magnetic circuit design. In essence, it is a magnetic sandwich assembly. The pull force of a sandwich structure will be noticeably greater than that of a pot magnet structure, which is a common magnet structure, according to the results of a finite element analysis (FEA). In addition to maximizing the performance of the magnet, the sandwich structure's draw force-distance relationship is better in accordance with the demands of the Magnetic Door Catcher application. Sintered Neodymium magnets are used in the ultra-thin Magnetic Door Catcher as well.

Specifications:

According to the housing material, magnetic door catchers are available in a variety of designs and arrangements that are commonly divided into two categories: plastic type and steel type. Different colored magnetic door catchers are the perfect fit for the interior of the kitchen cabinet, bookcase, or any other cabinet that needs to keep closing. 1 kilogram to 45 kg of pull force are possible.

Installation Instructions:

1. Set the cabinet shelf where the magnetic catch body is located. Make pencil markings in the mounting holes of the catch body as you align the front of the catch body with the front edge of the shelf.

2. After making a pencil mark, drill pilot holes and screw the magnetic catch body to the shelf.

3. Place the striker plate so that it is next to the magnet when the cabinet door is closed, pressing it firmly on the inside of the door. Make pilot holes in the striker plate and attach it to the door with screws.

4.Shut the door and confirm that the magnet is holding it shut. Remove the catch body's screws and push it forward if it seems that less force is needed to open the door. tighten the screws once more.

Hot Tags: magnetic door catcher, China magnetic door catcher manufacturers, suppliers, factory